SHREYAS series of Needle valves are available in bar stock round & Square body with Screwed connections BSPT, NPT, Socket Weld, Butt Weld & Special demand Flange End Connection.

Needle valves are similar in design and operation to the globe valve. Instead of a disk, a steady one piece needle stem with a long tapered point at the end of the valve stem. The long taper of the valve element permits a much smaller seating surface area than that of the globe valve; therefore, the needle valve is more suitable as a throttle valve especially air & pressure.

Normally the material of Needle Valve bodies and its various parts is SS 304, SS316, SS 304L or SS 316L, depending on the application. Needle valves are used to control flow into delicate gauges, which might be damaged by sudden surges of fluid under pressure.

Needle valves are also used to control the end of a work cycle, where it is desirable for motion to be brought slowly to a halt, and at other points where precise adjustments of flow are necessary and where a small rate of flow is desired.